ÍST EN 206:2013+A2:2021

(1) This document applies to concrete for structures cast in situ, precast structures, and structural precast products for buildings and civil engineering structures.(2) The concrete described by this document can be:— normal-weight, heavy-weight and lightweight;— mixed on site, ready-mixed or produced in a plant for precast concrete products;— compacted or self-compacting to retain no appreciable amount of entrapped air other than entrained air.(3) This document specifies requirements for:— the constituents of concrete;— the properties of fresh and hardened concrete;— the limitations for concrete composition;— the specification of concrete;— the delivery of fresh concrete;— the production control procedures;— the assessment criteria for individual values.(4) This document does not apply to:— aerated concrete;— foamed concrete;— concrete with density less than 800 kg/m3;— refractory concrete.(5) This document does not cover health and safety requirem

(1) This document specifies the scheme for the conformity assessment and assessment criteria for concrete.(2) The document provides technical rules for assessment of the performance of the concrete and actions to be followed in the event of non-conformity of the product or negative assessment.(3) This document gives provisions and guidance for certification of factory production control and of the concrete.

(1) This document specifies additional requirements to FprEN 206 1 for the constituents, specification and conformity control of concrete used in:— bored piles constructed in accordance with EN 1536;— diaphragm walls constructed in accordance with EN 1538;— cast-in-place displacement piles constructed in accordance with EN 12699;— micropiles constructed in accordance with EN 14199.NOTE 1 The requirements provided in this document are specified in accordance with FprEN 206 1:2025, 7.2 Specifications for designed concrete.(2) This document can also apply to applications in special geotechnical works other than those listed above.NOTE 2 For other special geotechnical works than those listed in paragraph (1) (e.g. cut-off walls or temporary works) provisions valid in the place of use can have provisions on cement types and suitability, minimum total binder content, minimum fines content, maximum water/total binder ratio, target values of fresh concrete properties and maximum

(1) This European Standard applies to concrete for structures cast in situ, precast structures, and structural precast products for buildings and civil engineering structures. (2) The concrete under this European Standard can be: - normal-weight, heavy-weight and light-weight; - mixed on site, ready-mixed or produced in a plant for precast concrete products; - compacted or self-compacting to retain no appreciable amount of entrapped air other than entrained air. (3) This standard specifies requirements for: - the constituents of concrete; - the properties of fresh and hardened concrete and their verification; - the limitations for concrete composition; - the specification of concrete; - the delivery of fresh concrete; - the production control procedures; - the conformity criteria and evaluation of conformity. (4) Other European Standards for specific products e.g. precast products or for processes within the field of the scope of this standard may require or permit deviations. (5) Addi

(1) This European Standard applies to concrete for structures cast in situ, precast structures, and structural precast products for buildings and civil engineering structures. (2) The concrete under this European Standard can be: - normal-weight, heavy-weight and light-weight; - mixed on site, ready-mixed or produced in a plant for precast concrete products; - compacted or self-compacting to retain no appreciable amount of entrapped air other than entrained air. (3) This standard specifies requirements for: - the constituents of concrete; - the properties of fresh and hardened concrete and their verification; - the limitations for concrete composition; - the specification of concrete; - the delivery of fresh concrete; - the production control procedures; - the conformity criteria and evaluation of conformity. (4) Other European Standards for specific products e.g. precast products or for processes within the field of the scope of this standard may require or permit deviations. (5) Addi