EN 1990:2023

Staða:

Umsagnarfrestur til - 29.11.2022

Íslenskt heiti:

Eurocode - Grunnur að burðarvirkis- og jarðtæknihönnun

Enskt heiti:

Eurocode - Basis of structural and geotechnical design

Tækninefnd:

CEN/TC 250

ICS flokkur:

91.010

Auglýst:

12.10.2022

Umfang (scope):

Scope of FprEN 1990 (1) This document establishes principles and requirements for the safety, serviceability, robustness and durability of structures, including geotechnical structures, appropriate to the consequences of failure. (2) This document is intended to be used in conjunction with the other Eurocodes for the design of buildings and civil engineering works, including temporary structures. (3) This document describes the basis for structural and geotechnical design and verification according to the limit state principle. (4) The verification methods in this document are based primarily on the partial factor method. NOTE 1 Alternative methods are given in the other Eurocodes for specific applications. NOTE 2 The Annexes to this document also provide general guidance concerning the use of alternative methods. (5) This document is also applicable for: - structural assessment of existing structures; - developing the design of repairs, improvements and alterations; - assessing changes of use. NOTE Additional or amended provisions can be necessary. (6) This document is applicable for the design of structures where materials or actions outside the scope of EN 1991 (all parts) to EN 1999 (all parts) are involved. NOTE In this case, additional or amended provisions can be necessary. 1.2 Assumptions (1) It is assumed that reasonable skill and care appropriate to the circumstances is exercised in the design, based on the knowledge and good practice generally available at the time the structure is designed. (2) It is assumed that the design of the structure is made by appropriately qualified and experienced personnel. (3) The design rules provided in the Eurocodes assume that: - execution will be carried out by personnel having appropriate skill and experience; - adequate control and supervision will be provided during design and execution of the works, whether in factories, plants, or on site; - construction materials and products will be used in accordance with the Eurocodes, in the relevant product and execution standards, and project specifications; - the structure will be adequately maintained; - the structure will be used in accordance with the design assumptions. NOTE Guidance on management measures to satisfy the assumptions for design and execution is given in Annex B.
Verð 38.566 kr.
Skráðu þig inn til þess að skoða sýnishorn
Skráðu þig inn til þess að vakta þennan staðal
Skráðu þig inn til þess að kaupa þennan staðal
Mynd sem fylgir EN 1990:2023/prA1

EN 1990:2023/prA1

(1) This document establishes principles and requirements for the safety, serviceability, robustness and durability of structures, including geotechnical structures, appropriate to the consequences of failure. (2) This document is also applicable for existing structures NOTE Additional provisions are given in prEN 1990-2. (3) This document is intended to be used in conjunction with the other Eurocodes for buildings and civil engineering works, including temporary structures. (4) This document describes the basis for structural and geotechnical verification according to the limit state principle. (5) The verification methods in this document are based primarily on the partial factor method. NOTE 1 Alternative methods are given in the other Eurocodes for specific applications. NOTE 2 The Annexes to this document also provide general guidance concerning the use of alternative methods. (6) This document is also applicable for structures where materials or actions outside th
Verð: 14.560 kr.
Mynd sem fylgir ÍST EN 1990:2002

ÍST EN 1990:2002

Eurocode 0 - Basis of structural design
Verð: 21.901 kr.
Mynd sem fylgir ÍST EN 1990:2002

ÍST EN 1990:2002

Eurocode 0 - Basis of structural design
Verð: 21.901 kr.
Menu
Top